back to top

9 Black-and-White Landscape Photography Tips for Better Photos

Last updated: November 12, 2023 - 10 min read
ExpertPhotography is supported by readers. Product links on ExpertPhotography are referral links. If you use one of these and buy something, we make a little money. Need more info? See how it all works here.
Subscribe Below to Download the Article Immediately

You can also select your interests for free access to our premium training:

Your privacy is safe! We will never share your information.

Every photographer will at least try black-and-white landscape photography. From the complete novice all the way through to the modern masters.

In the hands of landscape photographer geniuses such as Ansel Adams, it has produced some of the most memorable images of all time. Read on to learn how to capture inspiring black-and-white landscape photos.

Long Exposures
B&W 66-1066186 ND 3.0-1000X MRC 110M Lens Filter
B&W 77mm ND Neutral Density Lens Filter
Capture stunning black-and-white landscape photography with ease by using a neutral density filter. Control light and create inspiring visuals with a 10-stop light intensity reduction.

9 Black-and-White Landscape Photography Tips

Here are nine tips to improve your landscape photography.

1. Discover the Beauty of Black-and-White Landscape Photography

Color photos show us a place as it is. Black and white has a pure and timeless quality.

You might have yet to try your hand at this exciting form of photography. Or you might be looking for some advice on how to get the most out of your time in the wilderness.

There’s nothing better than heading out at the crack of dawn. Or even earlier, to photograph your favorite location.

Even better if it’s bathed in the soft glow of the golden hour, that all too brief period at the start and end of the day.

The golden hour might be the key to a great color image. But for those of us wanting to create stunning black-and-white landscape shots, we need to think differently.

In black-and-white landscape photography, the golden hour is no longer the golden rule. That gorgeous orange cast over your scene becomes reduced to a series of greys.

This will create a scene that has lost all its dramatic impact. Instead, you have produced a flat, uninspiring monochrome image.

So, if you can’t rely on color to make your photograph for you, what do you use instead?

Black and white photo of a lake and mountains

2. Accentuate Contrast

The best black-and-white landscapes have a strong range of tones. These tones range from almost pure white through to deep, rich black and everything in between.

That contrast across the image, when used well, can produce some striking results.

But we are used to seeing the full spectrum of colors. It takes a little effort to train our brains to think about a scene based on highlights and shadows.

That doesn’t mean disregarding the colors in front of us altogether. With experience, you will start seeing how an image translates in B&W. How the hue of certain elements, such as green grass, means different contrasts in black-and-white images.
A Black and white landscape photo of a line of boats sitting in harbour at low tide

3. Look for Interesting Textures

The world around us is full of texture, both the natural as well as the manmade aspects of it. In black-and-white landscape photos, we can use the difference in texture. For example, something in between, say, a craggy cliff face and a smooth sea.

This helps to create another sort of contrast. Strong side lighting, or even backlighting, can emphasize the texture of an object.
A black and white shot of a cliff overlooking water

4. Pay Attention to the Composition

The rules of composition still apply whether you’re shooting color or black-and-white landscape photos.

Leading lines, patterns, natural framing, placing the horizon, and varying your viewpoint. These are all things to keep in mind when framing your shot.

But when shooting monochrome, there are other important things too. You should be thinking about how the tones of the scene in front of you will look in the final image. Each color will be represented by a different shade. And hitting a pleasing balance across each element will make for a more successful result.

Also, don’t be afraid to experiment with a portrait format. Let the scene dictate what will look best.
 Long exposure black and white shot of a waterfall, portrait view

5. Learn About the Zone System

You’ll no doubt have heard of the Zone System. If you haven’t, I’m sure you’ll recognize the name of the man who invented it: Ansel Adams.

Equal parts artist and scientist. He developed the zone system in the 1930s. It was a way to exercise complete control over the tones in the images he was producing.

To do so, he divided each scene into ten zones, with pure black being zero and pure white being ten. Standardizing the process meant capturing the right exposure in any lighting conditions.

He identified the darkest zones in a scene. This helped his black-and-white landscape photography. It meant that those shadow areas would keep some detail through careful exposure.

Here, he was able to manipulate his negative and print-developing process. He made sure the highlights would also retain details.
A stunning black and white shot of sun-kissed lighthouse on promontory with dark clouds overhead

The zone system is as relevant today as it was all those decades ago. But with digital photography, we need the highlights in a scene.

Adams’s black-and-white film had a finite dynamic range. So do the sensors on our digital cameras.

He exposed his landscapes to save the shadows. And he pulled the brightest areas back with filters and darkroom magic. We need to do the opposite.

Expose to keep the brightest parts of your image intact. This way, you can save the shadows in post-production.

We also have a few advantages Ansel Adams couldn’t have even dreamed of.

Most DSLRs have shadow and highlight warnings on the LCD image. These warnings blink when a scene’s exposure is straying outside the boundaries the sensor can cope with.

Even better, you have the histogram. This gives you a visual representation of the tonal value of your shot. You’re able to assess if you need to adjust your exposure.
Black and white landscape image peering out from heights in a jungle, elephants in the distance

6. Use Filters for Better Exposures

You will often need to use filters. This will get the best tonal range in your black-and-white images. This is especially true if the scene is a high-contrast one.

A bright sky above dark ground can give a dynamic range outside your sensor’s range. Fit a graduated neutral density filter over your lens while you’re shooting. This will balance the two elements. And it will give an image that retains detail in both highlights and shadow.

These filters are opaque at the top, fading to clear at the bottom. They cut down on the amount of light reaching the sensor from the sky. And allow the exposure for the ground to stay the same.

They are available in different strengths and are incredibly helpful on bright, sunny days.

Every black-and-white landscape photographer should also have a range of non-graduated filters.

These are uniformly grey and reduce the amount of light passing through the lens. Use them to increase exposure times across the entire scene.

They are often used when photographing moving elements in a landscape photograph.

Consider the effects of a long shutter speed on the ocean. The water becomes beautifully smooth and gives a wonderful aesthetic quality.
Black and white coastal view across the water looking towards a lighthouse, shot with a long exposure

7. Convert Your Images to Black and White in Post-Processing

Many DSLRs have a monochrome mode, allowing you to shoot images in black and white in-camera.

It can be a useful tool when you’re pre-visualizing a scene. But I would always recommend shooting in RAW wherever possible. You can then convert that file to black and white in post-production.

Having a RAW color image gives you a lot more options when it comes time to perfect your shot.

In Photoshop, a black-and-white adjustment is a great option. It gives you a decent amount of control over the tones in your images.

Playing around with the sliders also helps. It will show how different colors appear in a monochrome image. For a greater level of creativity, I’m a big fan of the Silver Efex Pro 2 plugin from Nik.

You can alter every part of your image. You can darken certain elements or change the contrast wherever you like.

There are also 20 presets that emulate the effects of some of the most popular black-and-white films. These range from Ilford Pan F technical film through to the ultra-grainy Kodak P3200 TMAX Pro.

It’s an impressive platform and well worth a look.
A sea wall with strong contrast between negative spaces

8. Experiment with Different Settings

Setting a small aperture will help you keep your shot in focus from front to back.

Of course, there will come times when you may want to blur certain parts of a shot for creative reasons. So play around with different depths of field until you get the look you want.

Beware of diffraction, which is a loss of sharpness that can occur at very small apertures. In general, diffraction starts to come into play around f/22 and smaller.

Lenses vary, though. Experiment to see how small you can get your aperture. I always recommend shooting with as low of an ISO as possible to maintain image quality.

Using a very fast film could give some interesting grainy effects. But a high ISO shot on a DSLR will have a lot of ugly digital noise.

Black-and-white landscape photography allows for longer shutter speeds.

Unless you want to freeze action in your shot, you can set a shutter speed that gives you the exposure you want. You can coordinate this and also keep the ISO low and the aperture small.
A grayscale view of sparse forest

9. Find the Perfect Equipment for Black-and-White Photo Shoots

Here are three essentials you need along with your camera.

Camera Tripod

With a low ISO and a small aperture, there won’t be a huge amount of light making its way onto your sensor. That usually adds up to a longer shutter speed—one that prohibits handheld shots, so a sturdy tripod will be essential.

You could be hiking a fair distance before reaching the ideal spot to shoot from. Find a good compromise between strength and weight.

The lightest, strongest tripods are made from carbon fiber. But they are at the more expensive end of the price range.

Aluminum models from the likes of Manfrotto are a little heavier. But they are plenty sturdy enough and won’t break the bank.

Most tripods come with a built-in level. This ensures your horizons are straight. If your tripod doesn’t, it’s well worth investing in one.

Read through our in-depth guide to choosing tripods for landscape photography for more information and recommendations.

Camera Lenses

Wide-angle lenses are the most popular choice for black-and-white landscape photographers. On a full-frame DSLR, my Nikon 18-35mm is enough coverage for most situations.

I have a Nikon 24-70mm when I want to single out a particular element in a scene. In a perfect world, I’d have a range of fixed prime lenses for the very best image sharpness. But more often than not, a good quality zoom lens is almost as good.

Camera Bag

This is one of the best things about landscape photography in black and white. You only need to haul about a small amount of kit.

The right accessories will always help. But there’s no real need for flashguns, remote triggers, or cumbersome telephoto zooms.

All you need is a camera, lenses, cards, filters, and a spare battery. And they will fit in a backpack-style camera bag and leave you room for a jacket and a few snacks!

Strap a lightweight tripod onto your bag, and you’re good to go. Also, make sure you have a decent pair of hiking boots.

It’s an unwritten rule that the farther you have to walk to get your shot, the better it will be!
Black and white view looking up at small tree with white clouds in background from a distance

Conclusion: Black-and-White Landscape Photography Tips

The earliest photograph ever taken was a black-and-white landscape. Since then, photographers have turned this photography niche into an art form.

Great black-and-white landscape photos have a real elegance about them. Do it enough, and you’ll soon be making some stunning landscape photography of your own.

Want to learn more about landscape photography techniques? Check out our course, Simply Stunning Landscapes! And check out our editing tips for black-and-white photography too! 

Long Exposures
B&W 66-1066186 ND 3.0-1000X MRC 110M Lens Filter
B&W 77mm ND Neutral Density Lens Filter
Capture stunning black and white landscape photography with ease by using a neutral density filter. Control light and create inspiring visuals with a 10-stop light intensity reduction.